ENDRESS HAUSER DIN RAIL TEMPERATURE TRANSMITTER DIN, TMT112

Transformation of sensor signals into stable and standardized output signals for all industries.

SKU: TMT112 Category:

Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from resistance thermometers (RTD) and thermocouples (TC), it also transfers resistance and voltage signals using HART® communication. Swift and easy operation, visualization and maintenance by PC using operating software. Space-saving DIN rail mounting according to IEC 60715 (housing width: 12.6 mm).

BENEFIT:

  • Universal settings with HART®-protocol
  • High accuracy in total ambient temperature range
  • Fault signal on sensor break or short circuit, NAMUR NE 43 compliant
  • EMC to NAMUR NE 21, CE
  • Ex-Certification: ATEX Ex, CSA IS, FM IS
  • Galvanic isolation
  • SIL2 compliant

FIELD OF APPLICATION:

  • Temperature transmitter with HART® -Protocol for converting various input signals into a scalable 4 to 20 mA analog output signal

Input:

  • Resistance thermometer (RTD)
  • Thermocouple (TC)
  • Resistance transmitter (Ω)
  • Voltage transmitter (mV)
  • HART® -Protocol for front end unit or panel unit operation using the hand operating module (DXR275, DXR375) or a PC (e.g. ReadWin 2000 or FieldCare)
  • Installation on DIN rail according to IEC 60715

FEATURES AND SPECIFICATION:

Measuring Principle Resistance Temperature Detector
Input 1 x RTD, TC, Ohm, mV
Output 1 x analog 4…20 mA
Auxiliary power supply 12…35 V DC (standard-version)
12…30 V DC (Ex-version)
Communication HART
Installation DIN rail
Accuracy (Pt100, -50…200 °C) <= 0,2 K
(Pt100, -58…392 °F) <= 0,4 °F
Galvanic isolation yes
Certification UL rec. Com
SIL
FM IS,NI,Class I,Div.1+2,Group ABCD
CSA IS,NI,Class I,Div.1+2,Group ABCD
ATEX II2(1)G EEx ia IIC T4/T5/T6
ATEX II3G Ex nA IIC T6
CSA General Purpose
Brands

Endress + Hausers